Multiquip High-Pressure Centrifugal Pumps

Multiquip’s compact centrifugal pumps are built for residential, agricultural, and construction use, delivering high pressure with a unique closed impeller design. With multiple discharge ports and models reaching up to 377 ft of max head, these pumps offer versatility and performance for demanding applications.

Categories: ,

Description

Multiquip High-Pressure Centrifugal Pumps – Compact Power for Long-Distance Water Delivery

When the job calls for elevated heads, narrow nozzles, or long discharge lines, a high pressure centrifugal pump from Multiquip is the tool contractor’s trust. These gasoline-driven units leverage a precision closed-impeller system and a streamlined volute to concentrate flow into force, tackling irrigation, dust suppression, jetting, and firefighting support with ease. Unlike a conventional centrifugal water pump that prioritizes volume overhead, every Multiquip model in this series is optimized to push water up to 377 ft while maintaining reliable, pulsation-free delivery. Because crews often face mixed site conditions, the pumps also handle modest debris loads—providing more versatility than a pure clean-water set and filling the gap between a standard transfer pump and a heavy trash pump.

Engineered for High Head Performance

  • Closed Impeller Efficiency
    A stainless-steel closed impeller minimizes backflow and slippage, converting engine torque into pressure rather than wasted turbulence. This engineering lets the high pressure centrifugal pump outperform bulkier designs while keeping fuel consumption low.
  • Triple-Port Discharge
    Three independent discharge ports give operators the flexibility to run sprinklers, hose lines, and fill tanks simultaneously. By splitting flow without complex manifolds, each centrifugal water pump maintains pressure where it counts and saves setup time on the jobsite.
  • Heavy-Duty Frames & Vibration Isolators
    A fully welded roll cage shields the volute and engine, while four rubber mounts absorb vibration—extending the life of gaskets and seals compared with entry-level dirty water pump alternatives.

All share the same quick-clean volute cover, allowing crews to clear occasional grit before it becomes a full trash pump job.

Key Advantages on the Jobsite

  • Rapid Priming System – Built-in vacuum assist fills the casing fast, so the high pressure centrifugal pump starts pushing water in seconds.
  • Durable Silicon-Carbide Seals – Resist abrasion from the fine sediment often suspended in a dirty water pump scenario.
  • Low-Oil Shutoff – Protects the engine during extended unattended operation, a must when the mobile pump is supplying water cannons or hillside sprinklers.
  • Easy Transport – Balanced center of gravity and optional wheel kits turn each unit into a go-anywhere centrifugal water pump that one tech can reposition.

Ideal Applications

  1. Dust Control & Soil Compaction – Deliver atomized spray over large pads without relocating the high pressure centrifugal pump.
  2. Agricultural Irrigation – Feed long lateral lines or hillside terraces that overwhelm a standard dirty water pump.
  3. Emergency Fire Support – Draft from ponds or tanks and power multiple hose reels when a conventional trash pump can’t reach required PSI.
  4. Hydro-Testing & Jetting – Generate the sustained pressure engineers need to certify new pipe runs.

Why Choose Multiquip?

Multiquip backs every high pressure centrifugal pump with nationwide parts availability, rigorous factory testing, and engines technicians already know how to service. By combining the portability of a gasoline-powered centrifugal water pump with the head characteristics of a booster set, these pumps let contractors tackle demanding pressure jobs without renting specialty gear. Add one to your fleet and experience how five decades of pump engineering translate into reliable, profit-driving performance—wherever high head and tough conditions meet.

QP15HP

1.5″ Suction/Discharge, Compact – Hand-Carry High Pressure Pump

A portable, hand-carry high pressure centrifugal pump that delivers exceptional pressure and high head performance. Only 22 lbs., this pump provides the perfect portable solution for applications such as: water jetting, equipment wash-down, emergency fire-fighting, dust control and irrigation.

  • Signature Multiquip die-cast aluminum casings to promote fast priming times.
  • Convenient carry handle.
  • Simple, EPA/CARB Certified 2.1HP HONDA gasoline engine.
  • Engineered for 56 GPM flow rate.
  • Maximum Head – 197′.
  • Delivers 86 psi.
  • 1.5” suction/discharge ports.
  • Silicon/carbon mechanical seal for durability.
  • Shock mounted pump design to minimize operating harmonics.
Unit Specifications
Suction x Discharge 1.5″ x 1.5″ in
38 suc. x 38 dis. mm
Max. Water Capacity 56 gpm 208 lpm
Max. Lift 25 ft 7.6 m
Max. Head 197 ft 60 m
Max. Pressure 86 psi 587 kPA
Max. Solid Intake 0.18 in 4.6 mm
Fuel Tank Capacity .8 qt 3.6 L
Optional Wheel Kit n/a
Dimensions & Weights
Overall Length 16 in 406 mm
Overall Width 11 in 279 mm
Overall Height 15 in 381 mm
Operating Weight 22 lb 10 kg

QP205SH

2″ Suction, High Pressure Pump, 106 GPM, 230 ft. MAX Head, Honda GX160
The QP205SH helped pioneer the small portable high pressure pump. True one-person operation for high-head applications and for portable fire fighting. Use also for temporary pressure for new fire sprinkler systems and landscaping sprinklers.
  • Pumps 106 gallons (401 liters) per minute.
  • Maximum head of 230 feet (70 meters).
  • Powered by a 4.8HP Honda GX160 gasoline engine.
  • Versatile multiple discharge manifold: (one) 1.5-inch (37 mm) and (two) 1-inch (25 mm) ports.
  • Ports can be used independently or simultaneously depending on the application.
Unit Specifications
Suction x Discharge 2 x 1.5, 1, 1 in
51 x 38, 25, 25 mm
Max. Water Capacity 106 gpm 401 lpm
Max. Lift 25 ft 7.6 m
Max. Head 246 ft 75 m
Max. Pressure 106.4 psi 734 kPA
Fuel Tank Capacity 3.8 qt 3.6 L
Optional Wheel Kit UWKA
Dimensions & Weights
Overall Length 20 in 508 mm
Overall Width 15 in 381 mm
Overall Height 16.5 in 419 mm
Operating Weight 64 lb 29 kg

QPT205SLT

2″ Suction, High Pressure Pump, 126 GPM, 312 MAX Head, Honda GX240
A medium-size high pressure pump that will work in almost all high-pressure applications. The QPT205SLT is sized perfectly for the new US Coast Guard portable fire fighting specification (46 CFR 27.301).
  • For: Jetting, Irrigation, Dust Control, and Portable stand-by Fire Fighting.
  • Dependable 7.9HP Honda GX240 engine.
  • Oil alert protects the engine from low engine oil level.
  • Muffler is equipped with a spark arrester.
  • Unique twin closed impeller design.
  • Versatile multiple discharge manifold: (one) 1.5-inch (37 mm) and (two) 1-inch (25 mm) ports.
  • May be used with optional 1.5-inch (37 mm) high-pressure fire hose and plastic adjustable spray nozzle.
Unit Specifications
Suction x Discharge 2 x 1.5, 1, 1 in
51 x 38, 25, 25 mm
Max. Water Capacity 126 gpm 477 lpm
Max. Lift 25 ft 7.6 m
Max. Head 312 ft 95 m
Max. Pressure 135.1 psi 931 kPA
Fuel Tank Capacity 6.3 qt 6 L
Optional Wheel Kit UWKA
Dimensions & Weights
Overall Length 25.2 in 640 mm
Overall Width 18.9 in 480 mm
Overall Height 23.2 in 589 mm
Operating Weight 99 lb 45 kg

QPT305SLT

3″ Suction, High Pressure Pump, 145 GPM, 328 ft MAX Head; Honda GX340
Multiquip’s versatile, multipurpose high pressure centrifugal pump handles all types of clear water applications, no matter how much water needs to be moved. The QP305SLT is our highest volume high pressure pump. Good for fire fighting and jetting applications and for moving up in those high-head jobs.
  • Powered by a 10.7HP Honda GX340 engine.
  • A 3-inch (80 mm) suction port.
  • Versatile multiple discharge manifold: (one) 1.5-inch (37 mm) and (two) 1-inch (25 mm) ports.
  • Unique twin closed impeller design.
  • Pumps up to 145 gallons (549 liters) per minute.
  • Weighs 110 pounds (50 kg).
  • High-pressure pump has a maximum head of 328 feet (100 meters).
  • Pressure of 142 psi.
  • Aluminum pump housing and unique twin closed impeller design.
Unit Specifications
Suction x Discharge 3 x 1.5, 1, 1 in
76 x 38, 25, 25 mm
Max. Water Capacity 145 gpm 548 lpm
Max. Lift 25 ft 7.6 m
Max. Head 328 ft 100 m
Max. Pressure 142 psi 979 kPA
Fuel Tank Capacity 6.3 qt 6 L
Optional Wheel Kit UWKA
Dimensions & Weights
Overall Length 28 in 711 mm
Overall Width 20.5 in 521 mm
Overall Height 23.8 in 605 mm
Operating Weight 110 lb 50 kg

QPT405SLT

4″ Suction, High Pressure Pump, 210 GPM, 377 ft MAX Head; Honda GX390

The QPT405SLT complements the MQ high pressure pump family and offers a 4” suction port with a 4” & 3” discharge manifold design. Multiquip’s versatile, multipurpose high pressure centrifugal pump tackles high pressure/high head clear water applications. The QPT405SLT is ideal for jetting operations, water wash, agricultural applications, and firefighting support.

  • WET Self Priming Design: simply fill the casing with water and the pump is primed in seconds.
  • Die Cast Aluminum Body: lightweight, resilient pump body for strength and easy handling.
  • Powered by a Honda GX390 engine w/ low oil alert system.
  • Provides a 4-inch suction port – and a versatile (one) 4” and (two) 3” discharge manifold design.
  • Cast Iron Ports: for durability and are easily replaced if damaged.
  • Tubular Steel Frame: rugged 1″ diameter steel frame encases and help protects the pump end and engine.
  • Stainless Steel Hardware: minimizes corrosion adds to operating longevity.
  • Unique twin closed impeller design that creates very high pressure to 163 psi.
  • Pumps up to 210 gallons per minute and provides 377 feet of head.
Unit Specifications
Suction x Discharge 3 x 3 x 4 in
76 x 76 x 102 mm
Max. Water Capacity 210 gpm 795 lpm
Max. Lift 25 ft 7.6 m
Max. Head 377 ft 115 m
Max. Pressure 163 psi 1125 kPA
Max. Solid Intake 0.18 in 6 mm
Fuel Tank Capacity 4.8 qt 181 L
Optional Wheel Kit UWKA
Dimensions & Weights
Overall Length 36 in 955 mm
Overall Width 28 in 750 mm
Overall Height 32 in 955 mm
Operating Weight 311 lb 141 kg