Multiquip Rammers – Gas Powered

Multiquip’s gas-powered rammers feature reliable Honda GX100 or GXR120 engines, delivering high impact force with low noise, emissions, and fuel use. No mixed fuel required, with models ranging from 1,215 to 3,505 lbs of force and shoe sizes up to 11.2 inches.

Description

Overview: The Multiquip Gas-Powered Jumping Jack Compactor

Multiquip’s latest gas units elevate the jumping jack compactor category with the reliability contractors expect from Honda-powered equipment. Purpose-built for tight trenches, repair patches, and confined backfill areas, these robust rammers thrive where larger plates can’t reach. Every model pairs a sealed 4-cycle engine with an engineered shoe that channels up to 3,505 lbs. of impact energy—delivering fast, dense compaction without the mixed-fuel hassles of older 2-stroke designs. Whether you call it a jumping jack tamper or a jumping jack machine, the result is the same: fewer passes, flatter lifts, and more productive crews.

Key Performance Advantages

✔️ High-Output Honda Power – GX100 and GXR120 engines generate consistent RPM for full-stroke blows, guaranteeing each jumping jack compactor hit packs maximum force.
✔️ 4-Cycle Efficiency – Lower noise, reduced emissions, and single-gas fueling streamline refills and keep operators on schedule.
✔️ Precision Impact System – Factory-matched spring and crank geometry amplify downforce, turning every ounce of engine torque into usable ground energy.
✔️ Low-Maintenance Filtration – A multi-stage cyclonic air cleaner shields the power plant from dust, extending service intervals on job sites where downtime is costly.
✔️ Operator Comfort – Heavy-duty shock mounts and an ergonomically angled handle reduce hand-arm vibration, letting crews run the jumping jack machine longer without fatigue.

Model Lineup & Specs at a Glance

  • MTR40HF – 1,215 lbs. impact, 5.9 in shoe; a nimble fit for utility trenching or tight corners.
  • MTX50HD – 2,316 lbs. impact, 10.4 in shoe; a balanced choice for general contractors needing a mid-range jumping jack compactor.
  • MTX60HD – 3,060 lbs. impact, 10.4 in shoe; extra punch for cohesive soils that demand higher energy.
  • MTX70HD / MTX70HDR – 3,350 lbs. impact, 11.2 in shoe; built for deeper lifts and pipeline prep, available with GX100 or GXR120 power.
  • MTX80HDR – 3,505 lbs. impact, 11.2 in shoe; the heavyweight champion of the series, delivering peak force for the toughest backfill tasks.

Across the range, engineers balanced weight distribution and a low center of gravity to keep each jumping jack tamper steady through the stroke, translating energy directly into the soil, not the operator’s arms.

Engineered Details That Matter

Fuel-Smart Operation
A precision carburetor and electronic ignition maximize burn efficiency, trimming daily gasoline costs while ensuring the rammers stay responsive under load.

Protected Powertrain
A centrifugal clutch isolates the engine at idle, preventing accidental shoes strikes when maneuvering the jumping jack machine in tight spaces.

Transport-Ready Design
Integrated lift points and folding handles let one person load or unload, so the jumping jack compactor moves effortlessly from trailer to trench.

Why Choose Multiquip?

✔️ Decades of Field Testing – Proven durability in municipal, commercial, and rental fleets.
✔️ Parts & Service Network – Rapid access to OEM components reduces downtime for every model of rammers.
✔️ Operator-First Ergonomics – Balanced frames, easy-reach throttle levers, and intuitive maintenance checkpoints empower crews to focus on production, not repairs.

Put Multiquip Power to Work

When soil density, schedule, and profitability are on the line, trust the Multiquip gas-powered jumping jack compactor lineup to deliver. Upgrade your fleet with a fuel-efficient jumping jack tamper that outperforms traditional options and keeps crews productive. Contact your dealer today and experience how a Multiquip jumping jack machine turns raw engine power into rock-solid compaction, job after job, lift after lift.

MTR40HF

Unit Specifications
Blows Per Min. 699
Impact Force 1215 lbf 5.5 kN
Shoe Jump Height 2.2 in 55 mm
Shoe Dimensions (LxW) 10.6 x 5.9 in
270 x 150 mm
Travel Speed Per Min. 30 ft 9 m
Fuel Tank Capacity 2.1 qt 2 L
Dimensions & Weights
Overall Length 24.5 in 622 mm
Overall Width 13.8 in 351 mm
Overall Height 43.7 in 1110 mm
Operating Weight 101 lb 46 kg
Shipping Weight 107 lb 49 kg
Engine Specifications
Engine Make/Model Honda GX100
Start Method Recoil
Engine Power 2.8 HP 2.1 kW
Engine RPM 4100
Fuel Type Gasoline

MTX50HD

Unit Specifications
Blows Per Min. Up to 695
Impact Force 2,316 lbf 10.3 kN
Shoe Jump Height 2.8 in 70 mm
Shoe Dimensions (LxW) 13.4 x 10.4 in
340 x 265 mm
Travel Speed Per Min. 49.2 ft 15 m
Fuel Tank Capacity 2.7 qt 2.5 L
Dimensions & Weights
Overall Length 28.1 in 714 mm
Overall Width 10.4 in 265 mm
Overall Height 40.7 in 1,025 mm
Operating Weight 129 lb 59 kg
Engine Specifications
Engine Make/Model Honda GX100
Start Method Recoil
Engine Power 2.8 HP 2.1 kW
Engine RPM 4,100
Fuel Type Gasoline

MTX60HD

Unit Specifications
Blows Per Min. Up to 695*
Impact Force 3,064 lbf 1,390 kN
Shoe Jump Height 3.1 in 79 mm
Shoe Dimensions (LxW) 13.4 x 10.4 in
340 x 265 mm
Travel Speed Per Min. 55.8 ft 17 m
Fuel Tank Capacity 2.7 qt 2.5 L
Dimensions & Weights
Overall Length 28.1 in 714 mm
Overall Width 13.8 in 350 mm
Overall Height 40.4 in 1027 mm
Operating Weight 141 lb 64 kg
Engine Specifications
Engine Make/Model Honda GX100
Start Method Recoil
Engine Power 2.8 HP 2.1 kW
Engine RPM 4,100
Fuel Type Gasoline

MTX70HD

Unit Specifications
Blows Per Min. Up to 690*
Impact Force 3,350 lbf 1520 kN
Shoe Jump Height 3.1 in 79 mm
Shoe Dimensions (LxW) 13.4 x 11.2 in
340 x 285 mm
Travel Speed Per Min. 55.8 ft 17 m
Fuel Tank Capacity 2.7 qt 2.5 L
Dimensions & Weights
Overall Length 31.0 in 788 mm
Overall Width 13.8 in 350 mm
Overall Height 40.4 in 1027 mm
Operating Weight 165 lb 75 kg
Engine Specifications
Engine Make/Model Honda GX100
Start Method Recoil
Engine Power 2.8 HP 2.1 kW
Engine RPM 4,100
Fuel Type Gasoline

MTX70HDR

Unit Specifications
Blows Per Min. Up to 690
Impact Force 3,350 lbf 1520 kN
Shoe Jump Height 3.1 in 79 mm
Shoe Dimensions (LxW) 13.4 x 11.2 in
340 x 285 mm
Travel Speed Per Min. 55.8 ft 17 m
Fuel Tank Capacity 2.7 qt 2.5 L
Dimensions & Weights
Overall Length 31.0 in 788 mm
Overall Width 13.8 in 350 mm
Overall Height 40.4 in 1027 mm
Operating Weight 165 lb 75 kg
Engine Specifications
Engine Make/Model Honda GXR120
Start Method Recoil
Engine Power 3.6 HP 2.7 kW
Engine RPM 4100
Fuel Type Gasoline

MTX80HDR

Unit Specifications
Blows Per Min. Up to 678*
Impact Force 3,505 lbf 1590 kN
Shoe Jump Height 3.1 in 79 mm
Shoe Dimensions (LxW) 13.4 x 11.2 in
340 x 285 mm
Travel Speed Per Min. 49.2 ft 15 m
Fuel Tank Capacity 2.7 qt 2.5 L
Notes: *Variable speed impact — up to maximum impact force.
Dimensions & Weights
Overall Length 31.0 in 788 mm
Overall Width 14.4 in 365 mm
Overall Height 40.4 in 1027 mm
Operating Weight 181 lb 82 kg
Engine Specifications
Engine Make/Model Honda GXR120
Start Method Recoil
Engine Power 3.6 HP 2.7 kW
Engine RPM 4100
Fuel Type Gasoline