Multiquip Essick – Stationary Mixers

For over 90 years MQ Essick plaster / mortar mixers have set the standard for innovation and durability. The PRO Series – in 12 or all new 20 cubic foot capacity – stationary mixers increases contractor productivity in applications using on-site silo dispensing systems.

PRO20 – 20 cf Mortar, 18 HP Vanguard
PRO12 – 12cf Mortar, Honda GX390
PRO12E51 – 12cf Mortar, 5.0 HP 1Ø 230V Electric Motor
PRO12E53 – 12cf Mortar, 5.0 HP 3Ø 230V Electric Motor
PRO12E53-460V – 12cf Mortar, 5.0 HP 3Ø 460V Electric Motor

Add to quote
Categories: , ,

PRO20

20 cf Mortar, 18 HP Vanguard

An impressively large mixing capacity and powerful drive system sets the MQ Essick PRO20 apart from other mixers on the market.

The PRO20 features a reliable 18 HP engine and robust hydraulic drive to handle the toughest mixes. Nothing else comes close in performance, dependability or value

  • Thick drum wrap — 1/4 in. wrap with 3/8 in. ends to resist abrasion.
  • High torque hydraulic motor with integral relief.
  • Reduced operator fatigue — over­center dump and adjustable height (23 to 43 in) enables loading at waist level.
  • Minimizes waste — built-in spill plate directs excess material back into the tub.
  • Easy machine maneuverability — convenient access forklift pockets are approachable from any side of the mixer.
  • Readily accessible drive and dump controls are located above the engine cowling.
  • Fits in the bed of a pickup truck — 95.7 x 44.9 x 58.0 in (LxWxH) with legs retracted
Unit Specifications
Capacity 20 ft³ 566 L
Bags 6-7
Max. Aggregate Size 1 in 25.4 mm
Adjustable Drum Discharge Height 23 to 43 in.
Drive System Hydraulic
Dump Action Hydraulic
Dimensions & Weights
Shipping Dimensions 95.7 x 44.9 x 58 in
2431 x 1140 x 1473 mm
Shipping Weight 2004 lb 909 kg
Engine Specifications
Engine Make/Model Vanguard
Start Method Recoil/Electric
Engine Power 18 HP kW
Fuel Type Gasoline

PRO12

12cf Mortar, Honda GX390

For almost 90 years MQ Essick plaster / mortar mixers have set the standard for innovation and durability. The 12 cubic foot capacity PRO12 series increases contractor productivity in applications using on-site silo dispensing systems. The PRO12 uses a powerful hydraulic drive to power through the toughest mix designs. A unique over-center dump design easily discharges material into large mud tubs with minimal operator fatigue.

  • Reduced fatigue by enabling operator to load at waist level. Ergonomically designed to load low and dump high.
  • Adapt to any job site, while maintaining a compact footprint, with 130° swing-away stabilizers.
  • Extra thick 1/4″ steel drum wrap with 3/8″ ends resists wear and dents.
  • Adjustable height – discharge height 24″ ~ 42.5″.
  • Easily fits in a standard pickup truck bed with its compact design with inboard hydraulic motor.
  • Extended run times – up to 8 hours – with 5-gallon fuel tank.
  • Costly waste is reduced by a spill plate that directs excess material into the tub.
  • Tackle stiff mix designs, and handle up to 1-inch aggregate, with a powerful hydraulic drive.
  • Convenient access forklift pockets from any side of the mixer.
  • Drive and dump controls easily accessible and located above the engine cowling.
  • Greasable paddle shaft seal provides long service life.
Unit Specifications
Capacity 12 ft³ 340 L
Bags 3-4
Max. Aggregate Size 1 in 25.4 mm
Adjustable Drum Discharge Height Up to 42.5 inches
Drive System Hydraulic
Dump Action Hydraulic
Dimensions & Weights
Overall Length 73.5 in 1917.7 mm
Overall Width 35.0 in 889 mm
Overall Height 45.0 in 1143 mm
Operating Weight 1580 lb 716.68 kg
Engine Specifications
Engine Make/Model Honda / GX390
Start Method Recoil/Electric
Engine Power 11.7 HP 8.7 kW
Fuel Type Gasoline

PRO12E51

12cf Mortar, 5.0 HP 1Ø 230V Electric Motor

For almost 90 years MQ Essick plaster / mortar mixers have set the standard for innovation and durability. The 12 cubic foot capacity PRO12 series increases contractor productivity in applications using on-site silo dispensing systems. The PRO12E51 uses a powerful hydraulic drive to power through the toughest mix designs. A unique over-center dump design easily discharges material into large mud tubs with minimal operator fatigue.

  • Reduced fatigue by enabling operator to load at waist level. Ergonomically designed to load low and dump high.
  • Adapt to any job site, while maintaining a compact footprint, with 130° swing-away stabilizers.
  • Extra thick 1/4″ steel drum wrap with 3/8″ ends resists wear and dents.
  • Adjustable height – discharge height 24″ ~ 42.5″.
  • Easily fits in a standard pickup truck bed with its compact design with inboard hydraulic motor.
  • Costly waste is reduced by a spill plate that directs excess material into the tub.
  • Tackle stiff mix designs, and handle up to 1-inch aggregate, with a powerful hydraulic drive.
  • Convenient access forklift pockets from any side of the mixer.
  • Drive and dump controls easily accessible and located above the motor cowling.
  • Greasable paddle shaft seal provides long service life.
Unit Specifications
Capacity 12 ft³ 340 L
Bags 3-4
Max. Aggregate Size 1 in 25.4 mm
Adjustable Drum Discharge Height Up to 42.5 inches
Drive System Hydraulic
Dump Action Hydraulic
Dimensions & Weights
Overall Length 73.5 in 1917.7 mm
Overall Width 35.0 in 889 mm
Overall Height 45.0 in 1143 mm
Operating Weight 1580 lb 716.68 kg
Electric Motor Specifications
Electric Motor Make/Model Teco WestingHouse
Electric Motor  Power 5.0 HP
Voltage 230V V
Phase Single Phase (1Ø)

PRO12E53

12cf Mortar, 5.0 HP 3Ø 230V Electric Motor

For almost 90 years MQ Essick plaster / mortar mixers have set the standard for innovation and durability. The 12 cubic foot capacity PRO12 series increases contractor productivity in applications using on-site silo dispensing systems. The PRO12E53 uses a powerful hydraulic drive to power through the toughest mix designs. A unique over-center dump design easily discharges material into large mud tubs with minimal operator fatigue.

  • Reduced fatigue by enabling operator to load at waist level. Ergonomically designed to load low and dump high.
  • Adapt to any job site, while maintaining a compact footprint, with 130° swing-away stabilizers.
  • Extra thick 1/4″ steel drum wrap with 3/8″ ends resists wear and dents.
  • Adjustable height – discharge height 24″ ~ 42.5″.
  • Easily fits in a standard pickup truck bed with its compact design with inboard hydraulic motor.
  • Costly waste is reduced by a spill plate that directs excess material into the tub.
  • Tackle stiff mix designs, and handle up to 1-inch aggregate, with a powerful hydraulic drive.
  • Convenient access forklift pockets from any side of the mixer.
  • Drive and dump controls easily accessible and located above the motor cowling.
  • Greasable paddle shaft seal provides long service life.
Unit Specifications
Capacity 12 ft³ 340 L
Bags 3-4
Max. Aggregate Size 1 in 25.4 mm
Adjustable Drum Discharge Height Up to 42.5 inches
Drive System Hydraulic
Dump Action Hydraulic
Dimensions & Weights
Overall Length 73.5 in 1917.7 mm
Overall Width 35.0 in 889 mm
Overall Height 45.0 in 1143 mm
Operating Weight 1580 lb 716.68 kg
Electric Motor Specifications
Electric Motor Make/Model Teco Westinghouse
Electric Motor  Power 5.0 HP
Voltage 230V V
Phase Three Phase (3Ø)

PRO12E53-460V

12cf Mortar, 5.0 HP 3Ø 460V Electric Motor

For almost 90 years MQ Essick plaster / mortar mixers have set the standard for innovation and durability. The 12 cubic foot capacity PRO12 series increases contractor productivity in applications using on-site silo dispensing systems. The PRO12E53-460V uses a powerful hydraulic drive to power through the toughest mix designs. A unique over-center dump design easily discharges material into large mud tubs with minimal operator fatigue.

  • Reduced fatigue by enabling operator to load at waist level. Ergonomically designed to load low and dump high.
  • Adapt to any job site, while maintaining a compact footprint, with 130° swing-away stabilizers.
  • Extra thick 1/4″ steel drum wrap with 3/8″ ends resists wear and dents.
  • Adjustable height – discharge height 24″ ~ 42.5″.
  • Easily fits in a standard pickup truck bed with its compact design with inboard hydraulic motor.
  • Costly waste is reduced by a spill plate that directs excess material into the tub.
  • Tackle stiff mix designs, and handle up to 1-inch aggregate, with a powerful hydraulic drive.
  • Convenient access forklift pockets from any side of the mixer.
  • Drive and dump controls easily accessible and located above the motor cowling.
  • Greasable paddle shaft seal provides long service life.
Unit Specifications
Capacity 12 ft³ 340 L
Bags 3-4
Max. Aggregate Size 1 in 25.4 mm
Adjustable Drum Discharge Height Up to 42.5 inches
Drive System Hydraulic
Dump Action Hydraulic
Dimensions & Weights
Overall Length 73.5 in 1917.7 mm
Overall Width 35.0 in 889 mm
Overall Height 45.0 in 1143 mm
Operating Weight 1580 lb 716.68 kg
Electric Motor Specifications
Electric Motor Make/Model Teco Westinghouse
Electric Motor  Power 5.0 HP
Voltage 460V V
Phase Three Phase (3Ø)

Related products